Chipped, flaking or broken-away concrete is more than a cosmetic problem. Spalling lets water deeper into the slab, and every Richmond winter gives that water another chance to freeze and widen the damage. Understanding why concrete spalls helps you decide whether a patch, a resurfacing or a full replacement is the right fix.
Spalling is when pieces of the concrete surface break loose, leaving rough, shallow craters. It is often confused with two other common problems.
All three can show up on the same driveway or patio, and they often share the same root causes.
Spalling rarely has a single cause. Most damage comes from a combination of the following.
Shallow spalling on a driveway, patio or walkway is usually a surface problem, but it should not be ignored. Each spalled area holds water and debris, and the damage tends to grow. Deeper spalls, exposed or rusting steel, or spalling on foundations, steps and retaining walls deserve a professional inspection, because they can point to problems below the surface.
The right repair depends on how deep the damage goes and how much of the slab is affected. A typical professional spall repair follows the steps outlined in the American Concrete Institute bulletin Spall Repair of Horizontal Concrete Surfaces.
When spalling is limited to a few spots, targeted concrete repair in Richmond is often enough. When the surface is worn across a wide area but the slab underneath is still solid and level, concrete resurfacing can restore it with a new top layer. Our guide to when concrete resurfacing makes sense covers how to tell the difference. If the slab is cracked through, sinking or heavily damaged, replacement is usually the better long-term choice.
Yes. Most spalled driveways, patios and walkways can be repaired by removing the loose concrete and placing a bonded repair material. Widespread or deep damage may call for resurfacing or replacement.
Scaling is thin flaking of the surface across a broad area. Spalling is when larger pieces break away, often at joints, edges or over corroding steel.
Sealing does not fix existing spalls, but a penetrating sealer reduces how much water and salt enter the surface, which helps prevent new damage.
If the slab is level and mostly solid, repairing or resurfacing is usually worthwhile. If it is badly cracked or uneven, replacement may give you a better result.
Smith Evergreen Concrete repairs, resurfaces and replaces driveways, patios, walkways and steps across Richmond and the surrounding areas. Schedule a free estimate and we will inspect the damage and recommend the right fix.
Contact Number: (804) 994-8950
Email: info@smith-evergreen.com

12631 Oaklake Crest Way, Suite 101, Midlothian, VA 23112
